Lift-Type Disc Harrows Pull-Type Disc Harrows Chisel Plows Levee Plows
Home History Trade Shows Horsepower Chart Contact Us
MODEL 97

STANDARD EQUIPMENT

  • Disc Blades - 22" or 24" Diameter
  • 1-¼" Square Steel Axle
  • Relube Quadraseal Ball Bearings
  • Rigid Bearing Hangers w/ Wear Plates
  • Adjustable Angle of Cut - 18° or 21°
  • Disc Gang Wrench
  • Disc Spacing - 9" 

EXTRA EQUIPMENT

  • Heavy Duty Scraper Blades
  • Cover Disc
  • Balk Buster
  • Spring Bearing Hangers w/Wear Plates


FEATURES
Frame Design
The frame of the Model 97 is constructed heavy and durable 4 x 4" steel tubing welded and braced, in a compact close-coupled design, which allows for excellent maneuverability in small fields.

Disc Gangs
Gangs are assembled in the factory and tightened to 750 ft. lbs.  The Gang Frames are made from rigid 3 x 5" steel tubing.


 

Choice of Discs
22" or 24" Cutout Discs are offered on the Model 97.  The disc blades are made from the highest quality steel for strength and durability.

Versatility
The Hitch is designed to adapt to a Category II Free Link or a Category II Quick Hitch.

Angle of Cut
Disc Gangs adjust individually to an 18º or 21º cutting angle.

 



SPECIFICATIONS
WIDTH
OF CUT
NUMBER
OF DISCS
NUMBER OF
BEARINGS
APPROX
WEIGHT (lbs)

*APPROX
HP

6' 2"
16
6
1,385
50-60
6' 10"
18
8
1,565
60-70
7' 6"
20
8
1,672
70-80
WIDE MAIN FRAME - CAT. II/III HITCH
8' 4"
22
8
1,798
80-90
9' 0"
24
12
1,898
90-100
*Approximate horsepower (HP) is only given as a guide.
Extremely hard, soft, hilly, or boggy conditions will change these figures.

CLICK HERE
to download Spec Sheet

This document requires Adobe® Acrobat Reader®. Click the link to the right for the free download.


Home | History | Trade Shows | Horsepower Chart | Contact Us

Athens Plow Company,Inc., P.O. Box 609, Athens, Tennessee 37371-0609 • For more information, call 423-744-7569
Copyright 2008 Athens Plow Company, Inc., All rights reserved

site by Hart Graphics.com